9-3SS/SC 2.8T V6 06′ on – DO88 Cold Air Intake Induction Kit

Description

Complete Performance Cold Air Intake Induction Kit

To Fit: SAAB 9-3SS/SC 2006 onwards all 2.8T V6 models (B284) (only suitable for use in conjunction with Do88 89mm Inlet Pipe Kit)

Lead time prior to shipping can be 5 – 7 working days if variants need to be ordered from Sweden. 

Significant advantages with do88 Air Filter Kit:

• do88 turbo inlet pipe has an air flow at 0,125bar/1,81psi pressure drop of 664CFM*, compared to the OEM pipe and air box that has 560CFM!
• Silicone coupler hose, 4 layer polyester fabric reinforced with steel wire for best possible airflow and high pressure!
• Rubber seals to offer the air filter the best possible protection from the hot air in the engine bay!
• See enlarged images for more information!

For those of you with high horse power goals in mind this complete air intake kit is a must! The intake system has better air flow than the stock air box and intake pipem, this is verified in Do88’s own SuperFlow SF-1020 flow bench. A custom made silicone hose is included with integrated stainless steel collar (3,5") for a clean/easy air filter installation. This hose is designed to fit together with the do88 89mm (3 1/2 inch) performance inlet pipe so for this reason the kits can only be used in conjuction with each other. 

The included heat shield is designed to create a screen between the air filter and the warm air in the engine compartment. This is done by a custom designed heat shield plate that comes with rubber seals, this makes the best seal as best possible to the bonnet insulation to ensure your air filter is protected from the hot air; better than other intake systems available! The filter is located in a position where it’s fed with cold air from the intake pipe from the front grille. If you want to improve the cold air flow to the filter you can replace the original air guide with a do88 air ducting hose which can be found on the site here, you can use this to lead air from any preferred location in the front of the car.

Include parts in the kit:

• Heat Shield
• Rubber Seals
• Silicone Hose
• Hose Clamps
• Installation Hardware
• AEM/BMC Dryflow Air Filter
• Equivalent to OEM part numbers: 55559847, 12805102, 12778842,12786800

Ref: LF-100R-Filter, LF-100S-Filter, LF-100B-Filter