Filter Parts By Model Range

Saab VIN Look Up

To accurately identify manufacturer specified vehicle model year (which can frequently be different to year of registration), please enter your 17 digit (vehicle identification number) VIN or Chassis number below. This number is generally located at the base of the windscreen, or on the vehicle documents.

Only Suitable for Vehicles 1986 onwards

Filter Parts By Manufacturer
main image
Click to enlarge

Our Price: £234.46

Available Options:
Share on social media

Complete Performance Cold Air Intake Induction Kit - Without Air Filter 

To Fit: SAAB 9-3 Sports Saloon/Sedan, Combi 2003 onwards & Convertible 2004 onwards all models with 2.0 or 1.8 Litre Turbo Engine.

NB: Not suitable for 2003 models with SAI (secondary air intake).

Significant advantages with do88 Air Filter Kit:

  • Do88 turbo inlet pipe has an air flow at 0,125bar/1,81psi pressure drop of 653CFM, compared to the OEM pipe and air box that has 452CFM!
  • Aluminium inlet pipe, 70mm outer diameter, mandrel bent for best possible airflow!
  • Silicone coupler hose, 4 layer polyester fabric reinforced with steel wire for best possible airflow and high pressure!
  • Rubber seals to offer the air filter the best possible protection from the hot air in the engine bay!
  • Complete kit upgrading all parts from the turbo all the way up to and including the air filter!
  • See enlarged image for more information!

For those of you with high horse power goals in mind this complete air intake kit is a must! The intake system has better air flow than the stock air box and intake pipem, this is verified in Do88’s own SuperFlow SF-1020 flow bench. The included air intake pipe has an outer diameter of 70mm (2 3/4") and is mandrel bent for best possible air flow. The pipe connects to the turbocharger inlet with a custom designed 4 PLY silicone hose designed for best air flow and then steel wire reinforced to handle high and varied pressure ranges!

To achieve best level of function fit and looks the pipe has CNC machined bracket and air mass meter flange! The air mass meter flange is welded to a carefully selected pipe section with correct air flow cross section to maintain proper air mass meter readings.

The included heat shield is designed to create a screen between the air filter and the warm air in the engine compartment. This is done by a custom designed heat shield plate that comes with rubber seals, this makes the best seal as best possible to the bonnet insulation to ensure your air filter is protected from the hot air; better than other intake systems available! The filter is located in a position where it’s fed with cold air from the intake pipe from the front grille. If you want to improve the cold air flow to the filter you can replace the original air guide with a do88 air ducting hose which can be found on the site here, you can use this to lead air from any preferred location in the front of the car.

Please note due to the position of the master cylinder on right hand drive cars, the fitment of the pipe is very tight, but it is possible. - please see large image. 

Include parts in the kit:

  • Inlet Pipe
  • Heat Shield
  • Rubber Seals
  • Silicone Hose
  • Hose Clamps
  • Installation Hardware
  • Does not include Air Filter, this option is for those of you who wish to source your own filter! 
  • Equivalent to OEM part numbers: 12786553, 12795151, 12805268, 12786800, 12802029 (ref only)

Ref: IR-110S, IR-110B, IR-110R

Customers who bought this product also purchased

Convert currencies
PFS Parts Ltd.
Unit 8 - Saxon Court,
Bradfield Close,
Finedon Road Ind. Est,
NN8 4RQ,
United Kingdom
Tel: +44 (0)333 577 9961Calls to 03 numbers cost no more than a national rate call to an 01 or 02 number and must count towards any inclusive minutes in the same way as 01 and 02 calls. These rules apply to calls from any type of line including mobile, BT, other fixed line or payphone. During business hours emails are responded to promptly at no cost. Further details regarding 03 numbers available here.


Fax: +44 (0)844 800 2740

Secure Payment
We accept

PFS Parts Ltd. is a specialist parts company established in 2003. This site offers a 'one-stop' online parts shop for Saab car parts at great prices. We can supply a huge selection of Saab parts, including genuine Saab parts, aftermarket parts and performance parts. Click for more about PFS Parts...

Copyright © 2024
PFS Parts Ltd is an independent supplier of Saab parts and is in no way connected to Saab AB or any of its group companies