Filter Parts By Model Range


×
Saab VIN Look Up

To accurately identify manufacturer specified vehicle model year (which can frequently be different to year of registration), please enter your 17 digit (vehicle identification number) VIN or Chassis number below. This number is generally located at the base of the windscreen, or on the vehicle documents.

Only Suitable for Vehicles 1986 onwards

Filter Parts By Manufacturer
main image
Click to enlarge

Our Price: £1,442.53

Share on social media
empty

Black Diamond Single Mass Flywheel Conversion Kit - Fast Road Organic Clutch (Stage 2, +30%)

To Fit: Saab 9-3 Sports 2.8 V6 - all front wheel drive models 2006 to 2010 - Front Wheel Drive models only (FWDNot suitable for XWD (all wheel drive) models

New Performance Single Mass Flywheel Conversion Kit to partner Black Diamond's very successful performance clutch range. We are seeing an ever-increasing demand for the ability to replace dual mass flywheels (DMF's) with single mass flywheels (SMF's).

With the change from a DMF to SMF the damping is transferred back to the driven plate, so all conversion kits are supplied with sprung drive plates.

Benefiting from Black Diamonds years of experience in brake technology the pressure plate surface is machined with grooves in it, helping to dissipate the heat generated, as well as remove the dust and gases created.

The Stage 2 clutch kit uses Kev-TEK, an aramid fibre friction material similar to Kevlar and is recommended for vehicles with a torque increase of up to 30%. These clutch kits provide an even stronger clamping pressure than the Stage 1, as well as boasting an even higher burst strength. This is aided by the extreme hardness of the aramid fibre material, which is nevertheless very lightweight. This friction material requires a breaking in period of about 600 - 800 miles of gentle use, this is to ensure it reaches it’s full friction qualities. The Stage 2 clutch kit is capable of withstanding the high temperatures associated with competition driving and so is ideal for the track.

The Solid Mass Flywheel is made from Billet Steel EN24T and with no moving parts will far outlast the original dual mass flywheel. 

Advantages of Converting from DMF to SMF

  • SMF's are more suited to conditions where frequent changes of engine speed and gear changes are made.
  • Additional torque caused by tuning an engine, or heavy competition use, can destroy a DMF.
  • Allows for faster gear changes for race situations.
  • Precision engineered and balanced.
  • SMF's have no moving parts so will long outlast the DMF's they replace.
  • These kits can be a much cheaper option than replacing with standard DMF and clutch.
  • No need to replace the whole system going forward, we offer a full range of service kits meaning that only the clutch will need replacement, not the whole system. Also the SMF kit is fully able to be upgraded through the different Black Diamond stages without the need to replace the flywheel.
  • The SMFP kit is usually significantly lighter than the OEM DMF & clutch.
  • SMFP kits are direct replacements for OEM DMF's/clutches, no other parts needed.

Disadvantages? Yes, there are some.  The SMFP is a performance product which may cause additional wear to the rest of the drivetrain and gearbox, due to removal of the vibration damping properties of the DMF. You may also notice an increase in transmission noise which a DMF can hide, and an increase in vibrations. These are normal and do not affect the performance of the kit.

  • 2 Piece Clutch Kit (Friction plate & Cover)
  • Solid Flywheel (Billet Steel EN24T)
  • Splines - 23
  • Friction Plate Diameter - 240 mm

Please note: These kits are produced to order, please allow around 1 week prior to despatch for manufacturing; for that reason they are non returnable. 

The kit does not include the release bearing / slave cylinder, we strongly recommend replacing this when fitting the kit. This can be found on our website here

Ref only - 55561421, 55557193, 55567362

Convert currencies
PFS Parts Ltd.
Unit 8 - Saxon Court,
Bradfield Close,
Finedon Road Ind. Est,
Wellingborough,
NN8 4RQ,
United Kingdom
Tel: +44 (0)333 577 9961Calls to 03 numbers cost no more than a national rate call to an 01 or 02 number and must count towards any inclusive minutes in the same way as 01 and 02 calls. These rules apply to calls from any type of line including mobile, BT, other fixed line or payphone. During business hours emails are responded to promptly at no cost. Further details regarding 03 numbers available here.

CALL THIS NUMBER HERE


Fax: +44 (0)844 800 2740

Secure Payment
We accept

PFS Parts Ltd. is a specialist parts company established in 2003. This site offers a 'one-stop' online parts shop for Saab car parts at great prices. We can supply a huge selection of Saab parts, including genuine Saab parts, aftermarket parts and performance parts. Click for more about PFS Parts...

Copyright © 2024 PartsforSaabs.com
PFS Parts Ltd is an independent supplier of Saab parts and is in no way connected to Saab AB or any of its group companies